Do you enjoy our content?
A lifted tile in the living room unveiled an unsettling truth: rainwater had been seeping in for months beneath the bay window. The culprit? A nearly imperceptible inverted slope on the terrace that redirected every storm inside the home.
Key takeaways
- An inverted slope of just 1.5 mm per meter is invisible yet directs all water toward the house
- Tile does not provide waterproofing: it’s the slope of the underlying screed that does the job
- Water always finds its way to the threshold, infiltrating at the junctions between joinery and masonry
- Correcting the issue without demolition is possible with drainage and leveling of the supporting screed
The day the rain revealed everything
Everything seemed perfect after tiling the outdoor terrace, completed just in time for summer. The grout was neat, the cuts were clean, and the overall appearance was flawless.
Then the first heavy storm hit. Water began to pool against the bay window instead of flowing toward the garden.
A few days later, a plank of the interior flooring was slightly warped near the patio door. Lifting it revealed clear evidence: moisture had risen beneath the living room flooring.
An almost invisible slope that changes everything
The issue was not visible during installation, and therein lies the trap. The slope is not visually apparent when it remains within acceptable limits of 1.5 to 2%, and all styles of tile can accommodate this. However, the opposite is also true: a reverse slope of half a centimeter per meter can be equally discreet, yet it directs water the wrong way.
The DTU 52.1 recommends that the supporting surface for tiling be inclined with a minimum slope of 1.5% to divert rainwater away from the building. This guideline is not merely an aesthetic suggestion; it is crucial for the durability of the installation.
This slope must be oriented away from the façade of the house, never toward it. In the project in question, the screed had been slightly misaligned near the threshold, creating a low point exactly where it should not have been.
Why water always finds the threshold
A bay window is never completely watertight by nature; it relies on the external environment to remain dry. During inclement weather, it is common to encounter infiltration issues at the thresholds of patio doors, with rainwater seeping in at the junctions between the joinery and masonry.
A professional on the Construire forum succinctly summarizes the mechanics involved: water falling on the terrace is channeled by a reverse slope right to the bay window, infiltrating the space between the slab and the threshold. This was precisely the scenario playing out here, storm after storm, with nothing visible from the outside.
The tiles themselves were never meant to act as a barrier. Tile does not provide waterproofing, and it is especially not what should be considered as such. It is the profile of the supporting surface underneath, the slope of the screed, that does all the work.
Common mistakes made by enthusiastic DIYers
Many homeowners undertake their terrace projects, often with great diligence, but without the professional tools for precision. A poorly calibrated laser level or a screed poured “by eye” can subtly reverse the flow direction.
Additionally, tiling all the way to the wall without allowing for breathing space or controlled slope exacerbates the situation. A forum contributor confirms this directly in a similar case: tiling to the wall without slope is a surefire way to create ongoing infiltration and moisture problems at the foot of the wall and threshold.
Another frequent pitfall is neglecting the strength of the support before installation. The support must have a minimum mechanical resistance; otherwise, a screed that is too young or poorly mixed will not endure over time.
How to fix it without tearing everything apart
The good news is that a poorly sloped terrace does not necessarily mean everything must be demolished. A drainage strip at the base of the façade can suffice to mitigate damage while awaiting a more comprehensive fix.
A forum user who faced the same issue suggests a practical and minimally invasive solution: creating a small clean-out strip of around twenty centimeters around the house using a draining material to limit water accumulation. A discreet channel with a determined low point can enhance this setup.
For a thorough fix, returning to the leveling of the supporting screed is essential before retiling. This slope must be applied across the entire surface of the terrace, achieved through either leveling or a new screed, not simply by adjusting the thickness of the joints on one side.







